I tried a few free 3D modeling programs, like FreeCAD, but nothing seemed to work out for me.įinally I read a suggestion that you can lower the model down below the print bed in Simplif圓D, and only the above-bed portion will actually be printed. Apparently this is no easy task – although I would have assumed this would be an option in Simplif圓D itself. I spent a few days trying to find a way to splice the model in half cleanly, so that I could easily glue it together post printing. Apparently the dimensions are incorrect for the QIDI 1, and the model appears outside of the printer bounds. Usually when importing models into Simplif圓D, if the model is too large for the specific printer, you will get an error saying so. Unfortunately, my QIDI Tech 1 printer and Simplif圓D don’t play 100% well with each other. I had recently purchased a copy of Simplif圓D, and thought this would make it, you know, simple. The entire sculpture from the artist comes in 4 pieces: 2 for the base, 1 for the mid section, and 1 for the top. I set out on a task to print this Deadpool knife holder that I found on thingverse for a friend.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |